{"id":269,"date":"2024-08-01T11:00:47","date_gmt":"2024-08-01T11:00:47","guid":{"rendered":"https:\/\/store.anetgroup.com\/?post_type=product&p=269"},"modified":"2026-05-16T13:56:05","modified_gmt":"2026-05-16T13:56:05","slug":"269","status":"publish","type":"product","link":"https:\/\/store.anetgroup.com\/index.php\/product\/269\/","title":{"rendered":"T-BERD\u00ae\/MTS-5800 Handheld Network Tester"},"content":{"rendered":"

\"T-BERD\u00ae\/MTS-5800<\/p>\n

 <\/p>\n

\n
\n

The T-BERD\/MTS-5800 handheld network tester is the only tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro\/core, mobile backhaul, and business services installations.<\/p>\n

The industry\u2019s smallest handheld instrument can test throughout the service life cycle, including fiber characterization, service activation, troubleshooting, and maintenance.<\/p>\n<\/div>\n<\/div>\n

\n

Key Benefits<\/h2>\n<\/div>\n
\n

\"T-BERD\u00ae\/MTS-5800<\/p>\n

\u2022 Simplifies multitechnology testing with an all-in-one dual10 G handheld
\n\u2022 Optimized for field use with a multitouch screen, scripted workflows, and clear results
\n\u2022 Supports efficient best practices with repeatable methods and procedures with Job Manager guided workflows
\n\u2022 Speeds fiber characterization, Ethernet service activation, and troubleshooting<\/p>\n

\n

Key Features<\/h2>\n<\/div>\n<\/div>\n
\n

\"T-BERD\u00ae\/MTS-5800<\/p>\n

\u2022 Fully-loaded TDM\/PDH to dual 10 G Ethernet, SONET, SDH, Fiber Channel, CPRI\/OBSAI, eCPRI, and OTN support
\n\u2022 Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564
\n\u2022 Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed\u2122 TCP throughput testing
\n\u2022 Timing\/Synchronization testing with PTP, SyncE, and 1 PPS, 2 MHz and 10 MHz Wander
\n\u2022 Compatible with VIAVI 4100-Series OTDR, FiberComplete, and COSA modules with Smart Link Mapper\u2122, fiber microscopes, and optical power meters<\/p>\n

\n
\n

Applications<\/h2>\n<\/div>\n<\/div>\n<\/div>\n
\"Applications\"<\/div>\n
<\/div>\n
\n
\n
\n
\n
\n

\u2022 Mobile and backhaul characterization, validation, and troubleshooting
\n\u2022 Converged Ethernet\/IP network testing and troubleshooting at 10 Mbps to 10 G interfaces
\n\u2022 Fiber link characterization and troubleshooting
\n\u2022 Installation and maintenance of OTN and legacy SONET\/ SDH and TDM\/PDH networks
\n\u2022 Remote radio head (RRH) testing at the wireless basestation, including CPRI 1-9 rates
\n\u2022 PIM and interference testing over optical links (RFoCPRI)
\n\u2022 Next generation Fronthaul eCPRI support<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

All-in-One Handheld Tool<\/h2>\n

\"All-in-One<\/p>\n

The configurable T-BERD\/MTS-5800 is the industry\u2019s smallest dual 10 G handheld instrument for Ethernet, SONET, SDH, OTN, Fiber Channel, and CPRI\/OBSAI testing:
\n\u2022 All test interfaces are readily available
\n\u2022 Compact form factor for easy portability:
\n7 x 9.5 x 3 in (17.8 x 24.1 x 7.62 cm)
\n\u2022 Large 7 in multi-touch display
\n\u2022 Tablet-like interface for easy navigation through test information and advanced workflows
\n\u2022 Integrated WiFi and Bluetooth lets you easily connect test sets and offload results<\/p>\n

Compatible with VIAVI Solutions Fiber Test Tools<\/h2>\n

\"Compatible<\/p>\n

Mobility, business services, and metro technicians can now test virtually any interface in their network as well as qualify fiber plant with one ultra-portable instrument.<\/p>\n

It\u2019s compatible with the P5000i fiber microscope, MP-Series optical power meters, OTDR modules, and Smart LInk Mapper analysis software.<\/p>\n

Optimized for Easy Field Use<\/h2>\n

\"Optimized<\/p>\n

\u2022 Fixed test interfaces eliminate loose pluggable modules
\n\u2022 LEDs indicate plug-ins for tests
\n\u2022 A streamlined user interface provides simple pass\/fail, green\/red results
\n\u2022 Extended battery life enables longer test times
\n\u2022 Boots up rapidly from power-on to test start
\n\u2022 Dual-port operation runs two tests simultaneously, including 10 G\/high-speed tests<\/p>\n

Enables Network Evolution \u2014 Today and Tomorrow<\/h2>\n

\"Enables<\/p>\n

The 5800 meets leading-edge, carrier-grade Ethernet requirements:
\n\u2022 Ensures reliability with link and service OAM (IEEE 802.3ah, 802.1ag, and ITU-T Y.1731)
\n\u2022 Validates network scalability with VLAN, Q-in-Q, MAC-in-MAC Ethernet-over-Ethernet, MPLS, and VPLS tunnelling technologies.
\n\u2022 Support for ODU multiplexing including ODU1, ODU0, and ODUflex
\n\u2022 Test emerging 5G technology with eCPRI specific testing including One-Way-Delay (OWD)
\n\u2022 Full-featured VoIP and IP video turn-up and troubleshooting tests
\n\u2022 Supports packet transport network (PTN) evolution with MPLS-TP technology
\n\u2022 Ethernet Service Disruption with multi-tier triggers
\n\u2022 Run Bi-Directional Forwarding Detection (BFD) against switch and router partners while generating traffic to measure KPIs<\/p>\n

Empower Cell-Site Technicians \u2013 Fiber testing to CPRI and eCPRI<\/h2>\n

\"Empower<\/p>\n

T-BERD\/MTS-5800 tools let cell-site technicians efficiently install and maintain backhaul and fronthaul networks. They can ensure BBU and RRH connectivity with CPRI and OBSAI tests:<\/p>\n

\u2022 Validate C-RAN connectivity across CWDM networks
\n\u2022 Test RRH health from the bottom of the tower or from a C-RAN location by emulating a BBU
\n\u2022 Identity PIM and interference issues from an optical test access point including quad spectrum with enhanced markers.(RFoCPRI)
\n\u2022 Support 2-Tone PIM generation enabling PIM detection without climbing a tower
\n\u2022 Bit Error Rate Test eCPRI fronthaul circuits
\n\u2022 Validate RJ-45 Ethernet wiring is properly crimped down and wire mapped including end-to-end shield ground connectivity
\n\u2022 CPRI Check automates setting Antenna Tilt, detecting PIM and reading VSWR<\/p>\n

And, they can verify network synchronization:<\/p>\n

\u2022 Emulate a 1588v2 master clock\/slave recovery for proper point-to-point (PTP) message propagation and packet-delay variation (PDV) verification
\n\u2022 Verify SyncE frequency synchronization accuracy and Ethernet synchronization message channel (ESMC) message propagation
\n\u2022 Measure wander on SyncE, 1PPS, T1, E1, and 2 and 10 MHz signals
\n\u2022 Track satellite movements to optimize GPS antenna placement
\n\u2022 Test Floor Packet Percentile per ITU PTP Frequency recommendations<\/p>\n

When equipped with an OTDR module, the T-BERD\/MTS-5800 is the perfect solution for mobile network testing, providing easy fiber link characterization and troubleshooting.<\/p>\n

TrueSAM Saves Valuable Service Activation Time<\/h2>\n

\"TrueSAM<\/h3>\n

StrataSync<\/h3>\n

\"StrataSync\"<\/p>\n

StrataSync is a hosted, cloud-enabled solution for managing assets, configurations, and test data on VIAVI instruments. It ensures that all instrument software is current and the latest options are installed. StrataSync lets you manage inventory, test results, and performance data anywhere with browser-based ease while it also improves technician and instrument efficiency. StrataSync manages and tracks test instruments, collects and analyzes results from the entire network, and it informs and trains the workforce.<\/p>\n

Test better and quicker with automated tests combined into one ultimate installation tool:<\/p>\n

\u2022 J-QuickCheck \u2014 a fast, automated test (RFC 2544, Y.1564) for validating end-to-end and auto-negotiation configuration
\n\u2022 Enhanced RFC 2544 \u2014 an automated turn-up test for validating key performance indicators (KPIs)\/concurrently measuring SLAs such as throughput, frame delay, delay variation, frame loss, and committed burst size (CBS) \u2014 optional
\n\u2022 Y.1564 SAMComplete \u2014 an automated service verification test that speeds the installation of multiple classes of services (COS)
\n\u2022 TrueSpeed per RFC 6349 \u2014 an automated, standards-based test that can save up to 25% of operating expenses (OpEx) and reveals the reason for slow file downloads, eliminating finger-pointing
\n\u2022 Interoperable with TrueSpeed VNF and QT-600 to speed testing<\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

\"VIAVI\r\nThe industry\u2019s smallest 10G handheld instrument, supports testing throughout the entire service life cycle<\/p>","protected":false},"featured_media":277,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[28],"product_tag":[],"class_list":["post-269","product","type-product","status-publish","has-post-thumbnail","product_cat-viavi-solutions","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/store.anetgroup.com\/index.php\/wp-json\/wp\/v2\/product\/269","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/store.anetgroup.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/store.anetgroup.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/store.anetgroup.com\/index.php\/wp-json\/wp\/v2\/comments?post=269"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/store.anetgroup.com\/index.php\/wp-json\/wp\/v2\/media\/277"}],"wp:attachment":[{"href":"https:\/\/store.anetgroup.com\/index.php\/wp-json\/wp\/v2\/media?parent=269"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/store.anetgroup.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=269"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/store.anetgroup.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=269"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}